Place of Origin:
china
Brand Name:
aiifar
Certification:
CE
Model Number:
PD-01
Contact Us
DTF Direct Printing Hot Melt Adhesive Powder Polyuerthane EVA PVC
Hot Melt Adhesive DTF Direct Printing Powder For Hot Transfer
|
Type
|
Hot melt powder
|
|
Place of Origin
|
Guangdong,china
|
|
Usage
|
DTF heat transfer
|
|
Melt Index
|
36±3 g/10min
|
|
Bonding temperature
|
125-145°C
|
|
Bonding time
|
10-15 S
|
|
Bonding pressure
|
1.5-2 kg/cm2
|
|
package
|
1KG/Bag
|
|
bag/carton
|
20bag/carton
|
|
Melt point(℃)
|
120°C
|
|
size W*L
|
80 -200um
|
|
Wash
|
Good wash fastness
|
|
Heat press temperature
|
120
|
|
Warranty
|
100% Safe, Enviromental Protection, Without Any Harmful Substances
100% Tested Strictly
|
Hot Melt Adhesive DTF Direct Printing Powder
Ideal for DTF processes and used to support DTF projects.
Easy adhesion and excellent adhesion.
low temperature.
Excellent breathability and excellent stability.
Excellent washing resistance and dry cleaning properties.
Step 1-Print on film
You need to print CMYK first, then a white layer (this is the opposite of Direct-to-garment (DTG)). This can easily be done with a single pass using the Kothari NeoRip software. Other software needs to do that. To achieve this, print twice.
Step 2-Apply powder
Apply the powder evenly while the print is still wet to ensure it adheres. Carefully shake off excess powder so that it does not remain on the outside of the printed matter. This is very important because it is the glue that holds the print on the fabric.
Step 3-Melting / curing the powder
Hover for 2 minutes in a heat press at 350 degrees Fahrenheit to cure the newly powdered print.
Step 4-Transfer
Now that the transfer print has been cooked, it's ready to be transferred to your clothes. Use a heat press to transfer the print film at 284 degrees Fahrenheit for 15 seconds.
Step 5-Cold peel
Wait for the print to cool completely before removing the carrier sheet from clothing or cloth.
Send your inquiry directly to us
